A hitch flag pole is necessary if you love to display your patriotism by flying the flag on national holidays. You can also use it to fly other flags on other days that are not symbolic of holidays.
However, shopping for a hitch flag pole is easier said than done. You need to ensure you get one that fits your hitch receiver and is easy to install and remove.
Here are the best trailer hitch flag poles in the market currently.
Top 5 Best Trailer Hitch Flag Pole
Name | Fitment | Installation | Price |
---|---|---|---|
MICTUNING Upgraded Version Hitch Mount Flagpole Holder | Universal Fitment for Any 2'' Hitch | 4pcs 1.5" easy-to-knob plum screws (2 for spared use) and 1pc hitch pin | |
Camco Hitch Mount Flagpole Holder | Flat plate to go under tire | Drive your car over the flat plate to hold it in place | |
PATRIOT SALES Standard Tow Hitch Dual Flag Holder | Slides into square hitches | Thumbscrews poles flag securely in place |
MICTUNING Upgraded Version Hitch Mount Flagpole Holder
This flag pole for your hitch has a universal fit and can be used with most 2” hitch receivers. It is compatible with any vehicle with a standard 2″ hitch receiver such as Jeeps, SUVs, RVs, pickups, trucks, campers, and trailers.
The pole uses a screw hole below the flagpole holder for increased stability, which is perfect even during rough rides. The pole comes with 4pcs 1.5″ easy-to-knob plum screws and 1pc hitch pin. It is made of heavy-duty steel and rust-resistant powder coating. It also has a drain-off hole on the bottom to drain away raindrops or melting snow. This enhances the product’s lifespan.
Its two fixed holes hold the flag pole firmly enough to lock the flagpole in the mount without wobbling or moving. It is easy to install and remove.
Features
- 4pcs 1.5″ easy-to-knob plum screws
- Heavy-duty steel
- A drain-off hole on the bottom
- Flagpole diameter: 1.6″
- 1 x hitch pin
Pros
- Universal fit
- Durable construction
- Rust-resistant powder coating
- Easy install
Cons
- It does not work with the installation hardware.
Camco Hitch Mount Flagpole Holder
The Camco hitch flag pole fits standard 2-inch hitch receivers. It can hold flagpoles up to 2.3 inches in diameter. It uses thumbscrews to hold the pole in place. The ole has a powder-coated finish that is weather resistant.
Features
- Standard fit
- 3 inch in diameter
- Powder-coated finish
Pros
- Rustproof
- Easy to install
- Durable
Cons
- It is not compatible with all hitches
PATRIOT SALES Standard Tow Hitch Dual Flag Holder
This truck trailer hitch flag pole features heavy-duty construction while remaining lighter weight. It can hold up to two flag poles. It fits 1″ standard flag poles.
Check this too: Best Trailer Hitch Covers
The flag holder is easy to install and uses thumbscrews to secure the pole. You can easily mount and display any two flags within seconds.
Features
- Heavy Duty Construction
- Holds two flag poles
- Easy Installation
- Thumbscrew
Pros
- Durable
- Multipurpose
- Standard fit
Cons
- It is not rustproof
How to Make Your Own DIY Trailer Hitch Flagpole
Items Needed:
- Ball hitch – ensure it can fit into your hitch receiver
- 70” galvanized pipe – diameter depends on the hole diameter of your ball hitch
- Two end caps – diameter matching the pipe
- One nipple – diameter matching the pipe and ball hitch
- One coupling – diameter matching the pipe and ball hitch
- Two carabiners, zip-ties, or u-ring clamp
- Pipe wrench
Steps:
- Install the ball hitch into the RV flag pole hitch receiver and secure it in place
- Remove the ball form the hitch if it came attached
- Then insert the nipple into the ball hitch from the bottom. Use a hammer or mallet to nudge it into place.
- Install the coupling onto the nipple on the upper side of the hitch and use the pipe wrench to tighten the coupling.
- Close the bottom side of the nipple using one of the end caps.
- Use the other end cap to cap the top end of the pipe.
- Then screw the pipe into the coupling and use the wrench to tighten it.
- Then proceed to attach the flag onto your new flag pole using the carabiners, zip-ties, or u-ring clamps.
Are Trailer Hitch Flag Poles Legal?
No. But there are guidelines for flying a flag on your truck or trailer that revolve around not inconveniencing your neighbors or fellow drivers. For instance, if your flag is too big and causes other drivers to be obstructed when driving, then you are pretty much committing a road traffic violation.
While most states do not have regulations regarding the mounting of flag poles on trucks, trailers, and other vehicles, obstruction the view of other drivers will get you flagged by traffic police. At the end of the day, you are responsible for maintaining the safety of other drivers with your actions.
The key things you need to consider are the placement of the flag and the size of the flag. Most flag poles are mounted at the rear end of the truck or trailer. Additionally, your flag should not flap onto your driver’s windshield.
The flag should also not drag on the ground or be offensive to other drivers. The display of controversial themed flags is unconstitutional. It should also be embellishment free lest they fly off the flag as you drive.
To ensure you do not violate any laws when flying your flag, you can follow the non-military vehicle guidelines;
- Your flag should not be mounted higher than the United States flag.
- The flag can be mounted on the roof, rear fender, or passenger side.
- The flag should not be half-staffed. It can be furled or secured with a black ribbon when going to a funeral.
Conclusion
The best trailer hitch flag pole should be weather resistant, compatible with most hitch receiver models, and be strong enough to keep your flag flying high. It should also be a one-man mounting and dismounting operation. Not to mention easy to store when it is not in use.
Check this too: How to Install a Trailer Hitch on a 2020 Subaru Outback