Weathertech mats are durable and keep your care clean even after spills or in a rainy season. If your vehicle has this kind of mat, it’s best to know how to clean them. All the mats are from different materials, and you need to use the appropriate weather tech cleaner. Cleaning weather tech mats is much tricky than regular mats as they display stains. Again, the mats’ materials make them hard to clean; thus, you should follow the proper techniques to clean your weather tech mat.
Best Way to Clean WeatherTech Mats
There are many ways to get all that dirt and grime off your weather tech mats. However, not all methods merit your time and effort. We will explore the most practical, simple, and efficient cleaning procedure that will get rid of mud, dust, stains, and other debris off your mats fast.
What You Require
- Garden hose
- Dish soap
- Scrubbing dish, cloth, or brush
- Bathtub
- Floormat specific cleaner
- Pressure washer
Shake it Out
Before you clean your mat, shake them to get rid of the loose dirt and dust. It’s best if you hit the mat gently with your hand or smack it against the wall to get out as much dirt as possible.
Pro Tip: Shaking and hitting releases all that debris into the air. You can make things neater by opting to vacuum your Weathertechs using a shop vac or a house vacuum on high suction settings
Hose it Down
Get rid of the loose dirt from the mat so that the hose pressure can easily clean. Spread your carpet on a clean floor before hosing it down. Use a regular outdoor water hose to give the weather tech mat a quick spray down. Hold your hose pipe gently and spry down your weather tech mats.
You can still consider using a pressure washer, as it’s more aggressive on stubborn dirt. However, you have to control your pressure as too much pressure can damage your floor mats. You can purchase a cheaper one from the local market. Some of the pressure washers like PowerSmart are light and enable a long reach from the electric outlet.
Clean in Mild Detergent and Soap
Add few drops of mild detergent or dish soap in a bucket or bathtub and fill it with water. Soak a sponge or a cleaning brush in the solution, and scrub the sides of a mat until it’s clean. If the carpet is heavily soiled, soak it in the soapy water to dissolve stubborn dirt and mud-caked onto the mat. You can still consider soaking it in a rubber and vinyl safe solution which is gentle to clean the rubber car mats.
After some time, gently scrub the mat to get rid of stubborn stains. If the bathwater becomes dirty after cleaning, empty the tub and fill it with clean water for rinsing. Air-dry or use a towel before placing your mat in the car. While installing your carpet in the vehicle, ensure you put it on the right side, whether on the passenger on the driver’s side.
Use a Mat Specific Cleaner
Finally, for better results, you could opt for a complete cleaning kit that comes with a cleaner, a brush, and cloths, to remove any dirt on your floormats. A cleaner like WeatherTech 8LTC36K car mat cleaner removes dirt and stains easily than other home methods. Spray the cleaner on the mat, brush, and wipe. Scrub with the brushes given to avoid destroying your carpet and rinse the mat with clean water. Air dry or wipe your mat, then spray a mist over the mat, which protects your rugs. Meguiar’s Natural Shine Protectant also keeps your carpets looking shiny and brand new.
Tips to Observe While Cleaning
- Avoid using harsh chemicals and abrasive agents s they may damage your mats. Choose the mild detergent, dish soap, or commercials mat cleaners.
- Keep oof from silicone-based products as they are unsafe for the mats and slippery.
- When reinstalling the driver’s mat, ensure it doesn’t interfere with the pedals.
How Do You Keep WeatherTech Mats Looking New?
You can keep your weather tech mats brand new by following these tips;
- Avoiding using harsh chemicals or abrasive cleaners as they damage your mats
- Avoid using silicone-based products since they are slippery and cause damage too
- Use a weather tech protectant cleaner
- Constantly shake your mat or vacuum it correctly before you start the cleaning process.
Can You Use Armor All on WeatherTech Mats?
You can’t use Armor All as it’s unsuitable for WeatherTech mats as it makes them slippery. It’s best to use other products like mild detergents and water or protectants. The Armor all makes the carpets become brittle and crack or even discolor. The solution is a solvent-based dressing. Thus, it’s good to avoid it on your car’s interior.
How Do You Get Salt Stains Out of Weathertech Floor Mats?
There are several ways you can use to get rid of the salt stains from your floor mat.
Hose Off Your Floormat
- Remove your mat out of the car and shake it out.
- Set your mat on the floor and hose it down.
- Later scrub with mild detergent and water. Add few drops of laundry soap to a bucket and fill it with water.
- Rinse the mat properly with clean water and dry it
Use Vinegar
- Mist the affected spots with water to get wet.
- Put warm water in a bucket mix with vinegar and dish soap.
- Dip a brush in the soapy water and scrub the mat.
- Scrub for several minutes until all the salt residue and stains come out and later rinse.
Check this too: Best Jeep Wrangler Floor Mats
Conclusion
Cleaning Weathertech floormats is an easy task if you follow the above-explained procedure to the latter. It’s best if you avoid spilling over on them, and in case it occurs accidentally, clean them as soon as possible to get rid of the stain. Spot cleaning is advisable in case of stains when the whole mat is clean. Shaking the carpet is essential to get rid of loose dirt before cleaning.