Most of the latest new cars are more high-tech with more electronic features, especially in the key fob. The device has more capabilities than just locking or unlocking doors, starting a vehicle remotely, or making a chirping sound to help locate your car in the parking lot. Some have so many features that the owners may not be knowing. This article helps know whether your F 150 has a remote start or not.
Does f150 have a remote start? Here’s how you find out if your vehicle has a remote start:
Check the Owner’s Manual
If your vehicle contains a remote starter, there will be information on the manual on how it works in your car. Check in the content of the manual to see if the feature is present.
Check Your Vehicle’s Key Fob
The key fob will have a special button if the remote start is present. The remote start symbol is usually an arrow that makes a partial circle. The owner first hits the lock button, then presses the remote-start button.
Test Out the Remote Start
Your owner’s manual should have instructions on how various systems works in the vehicle. But most remote starters require you to lock the car then double click the electrical-control start button.
How to Activate Remote Start on Ford F150
To activate the remote start, first press the lock button to lock all vehicles. Later, key the remote start switch twice. The exterior lamps will blink twice. The horn will chirp if the system fails to start unless the quiet start is on. The quiet start will also run the blower fan at a slower speed to reduce noise. You can enable remote start or disable it depending on the information display.
What Does Ford f150 Remote Start Do?
- Starting your ford vehicle – by pressing the lock button and the remote start button twice.
- Turning off the vehicle- press the 2X button twice. The exterior headlamps will shut off with the engine.
- Use the memory feature- when remote start is active, it will adjust the seating, mirrors, and steering column according to your pre-set positions.
- Give status feedback- with an equipped model, and the remote-control feedback will inform you of the status of remote start or stop commands as follows;
- solid green: remote start successful
- solid red: remote stop successful. vehicle is off
- blinking red: remote stop or start failed
- blinking green: awaiting status update
Benefits of Having Remote Start
- You can start your car while still in the house and wait for the heat to kick in and warm it.
- It helps melt snow and ice remotely b running the defroster.
- It cranks the air conditioner, so your car cools before you get in, especially in hot summers.
- Locating your car in a crowded lot, so no more wandering around.
- Increased vehicle security due to the improved tech and car alarms
- Synchronizes your car with the smartphone, so you can quickly locate your vehicle on the phone and even monitor its movements if you have given someone.
Instances When Remote Start Won’t Work
- When the ignition is on
- When an alarm is active
- When you disable remote start or stop
- The hood of the truck is open.
- Transmission is not in park mode.
- The vehicle battery is low.
- When the service engine light turns on in the instrument cluster
How Do I Reset My Ford Remote Start?
Try the following procedures to reset your remote start;
- Turn the remote off and on again.
- Pop the cover of your remote and remove the battery
- Wait for around 15 seconds.
- Put the battery back and replace the cover. Try if it will work.
- Check the battery.
- If you have another new battery, replace the one in the remote.
- Check if the remote start to work.
- Resetting your remote start
- Take all your car’s remote- start fobs, and while on the driver’s seat, close all doors.
- Fit the ignition key and turn to the accessory or on/right position or push the start button once without moving the brake pedal.
- Press the lock switch on your remote car starter and hold it for a second.
- Turn your key to the “Off” direction— the vehicle’s lights should switch off. Do this in five seconds of turning the key to the “On” position, don’t remove the key when switching it off.
- Repeat the on-off cycle three more times—you’ll do four in total.
- The locks should make a sound when you turn the key to the “On” position on the fourth cycle, signaling the remote fob is in programming mode.
- Press and hold the “Lock” dial on the key in the ignition and on any additional fob remote car starters you may have. Turn the key to the “Off” setting within ten seconds of turning it to the “on” mode for the fourth time.
- Remove the key from the ignition, get out of the car, and shut the door. Test if the remote car starter has reset, you can repeat the procedure if it fails. But if it continues, try troubleshooting.
Ford Remote Start Troubleshooting Guide
Before troubleshooting, make sure you are following the proper procedure of remote starting. Various issues face the remote start below are the causes and solutions:
Remote Starter is in Valet Mode
The Lock and Unlock buttons will work as usual, but pressing Start does not produce any vehicle response. Valet mode occurs when someone accidentally pushes the controls’ combination when the remote is in the purse or pocket. Again, many remote car starters will revert to valet mode when you disconnect the vehicle during service.
Check this too: Best Ford F150 Tonneau Cover
Check on the back of your remote for the right buttons to press to enter and exit valet mode (usually Lock and Trunk). When you press these keys, the parking lights should blink two times.
The vehicle flashes parking lights but doesn’t start
Pressing Start causes several flashes of the parking lights, yet the vehicle won’t start. If equipped, Lock and Unlock still function. The remote fails because the hood pin switch is broken or corroded. You should replace the hood switch at a mobile electric store.
Remote Control Losses Programming
Even if you press any button on your remote control, your vehicle does not respond. The loss of programming results when a vehicle’s battery is dead or disconnected for service; it’s a rare occurrence because many remotes are higher-end but if it does, call your technician to help you program it.
Remote is in Second Car Mode
It occurs when you accidentally press a combination of buttons, which results in the second car model. You will note when your vehicle fails to respond even after pressing any button. Check your owner’s manual or call your installer for directions.
Conclusion
To learn the latest upgraded remotes, ensure you always aware of the features present by checking on your owner’s manual. It’s best to understand the simple techniques like resetting, using the remote start, and troubleshooting, as explained in this article. Some of these tricks will save you from been stranded alone on the road.